Product Description
Highlights
FASTER SAMPLING RATE - With a high-speed A/D data acquisition of 2.5Msps, this handheld oscilloscope offers high sampling rates and bandwidths, easily toggling between waveform functions for measurement. Three waveform scanning modes: Auto/Normal/Single enhance work efficiency.
EXPANDED DETECTION RANGE - DC voltage range of 0~1000V, AC voltage range of 0750V, DC/AC range of 0~10A, resistance range of 0~40MΩ, capacitance range of 0~100μf, frequency range of 0~5MHz, diode/continuity open circuit voltage of 1.5V, and resistance judgment of 50Ω. Transistor amplification testing meets all testing requirements.
ENHANCED PRECISION - Equipped with a dedicated chip and automatic waveform capture function, our digital oscilloscope ensures simple operation. Utilizing software calibration technology and storing calibration coefficients, it offers more accurate measurements. To activate silent mode (disable button beeps), press and hold the "F4" button, then rotate the knob to power on.
LED BACKLIGHT AND STORAGE/READOUT - With an analog broadband range of up to D AC~1MHz, it maintains display and stores/reads up to 10 waveforms and 100 sets of measurement values. Featuring a 240X320 color screen with LED backlighting, it provides clearer visibility, suitable for nighttime work.
OVERLOAD PROTECTION & VERSATILITY - Built-in 500mA/10A dual protection tubes ensure double protection for the instrument. Choose between automatic shutdown or continuous operation, suitable for home, school, factory, and other workplaces. Distortion detection also ensures safety.
- Item Model NumberET828
- Number of Channels1 Channel, 2.5Msps Sampling Rate
- Analog Bandwidth1MHZ
- Sampling Rate2.5MS/S
- Display240 x 320 Color Screen
- BacklightConstantly On
- DC Voltage400mV - 1000V
- DC Current40mA - 10A
- Resistance400.0Ω - 40.00MΩ
- Frequency5HZ - 5MHZ
- AC Voltage400mV - 750V
- AC Current40mA - 10A
- Capacitance51.2nF - 100μF, 10mF
- Duty Cycle0.1% - 99.9%
- Diode /Continuity Test<50Ω Judgment Resistance, the buzzer will sound
- Product Weight0.64 lbs / 0.292 kg
- Product Dimensions3.27 x 6.30 x 1.26 in / 83 x 160 x 32 mm
Other Details
Products Covered by a Manufacturer's Warranty The manufacturer's warranty shall be the exclusive remedy for any product defect or failure. Please refer to the manufacturer's instructions to ensure that you can take advantage of your product's warranty. Some manufacturers require you to register your product in order to activate its warranty. We specifically disclaim any other express or implied warranties for products covered by a manufacturer's warranty. Products NOT Covered by a Manufacturer's Warranty For products not covered by a manufacturer's warranty, we provide a limited warranty of 1-Year for defective products from the date the product is received by the original purchaser or installer, unless otherwise specified at the time of purchase. The warranty only covers a replacement for a defective part unless such a replacement cannot be obtained. For such cases, a full refund will be issued to the original purchaser. A refund or an exchange of a defective part will only be processed if it meets the following terms and conditions: All products subject to a warranty claim must contain a defect in workmanship or material. The warranty does not extend to normal wear and tear of products; products damaged due to environmental conditions including rain, snow, hail, salt, or natural disasters; products damaged due to accident or collision; or product damage caused by other faulty parts. All items must not be damaged due to incorrect installation upon return. Products damaged as a result of abuse, misuse, improper repairs or maintenance, improper installation, alteration, or modification will not be covered by the warranty. The warranty is subject to the General Warranty Limitations below. If something goes wrong with your product, please send us an email. To have a replacement shipped to you. Please have your order number ready to ensure timely processing. General Warranty Limitations (Applies to all Product Warranties) For each of our product warranties offered above, the following provisions apply: The warranty is limited only to the original purchaser and is non-transferable. Under NO circumstances will our liability exceed the amount of the original sale. Each warranty does not cover any labor costs or incidental, indirect, special or consequential damages such as, but not limited to, physical injuries or property damage, loss of time, loss of use of the vehicle, inconvenience, air freight charges, rental vehicle charges, towing charges or accommodations resulting from a defect in or failure of the part. A prepaid shipping label will be issued for all returns due to warranty claim. All warranty claims must be accompanied by the original sales invoice. In addition, all returned items must have the RMA (Return Merchandise Authorization) number written outside the shipping box prior to return. Returned items without an original sales invoice or without the RMA numbers will NOT be accepted. Please refer to our Return Policy for more details. The warranty does not cover lost or stolen packages. Because the customer is the shipper, he/she is the only one who can file any lost claim with the shipping company. Therefore, the claim must be coordinated and processed through the shipping company by the customer. Each warranty represents the exclusive remedy for any product defect or failure and our total liability for any part we warrant. We make no other warranties, express or implied, including any warranties of merchantability, condition of any kind or fitness for a particular purpose. Some states do not allow disclaimers of implied warranties. Therefore all implied warranties that may apply to your part are limited to the duration of this written warranty. Some states also do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental, special, or consequential damages, so the above information may not apply to you.